How to install the compressor for an aquarium

How to install the compressor for an aquarium

As well as oxygen is necessary for all living beings, fishes. Therefore upon purchase of an aquarium it is worth not to forgetting also about acquisition of the compressor. It produces air which is so necessary for pets and living plants.

Instruction

1. The compressor is considered one of important devices for an aquarium. It is intended for water saturation by oxygen. If you have an aquarium of large volume, then and the device needs to be installed powerful. If in water there are living plants, at night oxygen is necessary for them. The fact is that all air which they process from carbon dioxide in the afternoon is necessary for them at night due to the lack of photosynthesis reaction.

2. At night considerably the level of carbon dioxide increases. The additional source of oxygen is necessary for inhabitants of an aquarium. The compressor is capable to compensate this loss. At visual inspection, it is the device which is releasing streams of the bubbles rising from an aquarium bottom. The size of these bubbles is less, the more they give oxygen to water. The compressor which is in an operating mode considerably improves water circulation, thereby creates uniform distribution of water temperature in an aquarium.

3. The choice of compressors is small. They are external and built in an aquarium. There is almost no difference between them. It is only in what built in, does not publish extraneous noises that very much suits the person who appreciates silence during sleep. However behind him thorough leaving, cleaning of times a week and check of sealing of joints is necessary. The external compressor does not require such thorough care. There are devices of aeration and on batteries, they are intended in order that during transportation of favourites not to leave them without oxygen. And in general, the compressor can and be not installed, however, only in case you already professional aquarian. It is pretty hard to achieve it. In an aquarium it is necessary to create all conditions for oxygen production. It is necessary to pick up correctly quantity of small fishes and plants, and then the correct environment where everything is balanced is created.

4. Best of all attach the compressor spray on an aquarium bottom, or to a wall, but is closer to a bottom, on special suckers. Further attach oxygen hoses to the spray. Then remove air tubes through a technological opening in an aquarium to the compressor.

5. Install the compressor out of an aquarium, according to recommendations. Do it so that water level was below the device. If you have no opportunity to install the device properly, then put the non-return valve on the compressor. It interferes with water ingress in the device. If the compressor is installed below water level in an aquarium, then liquid can get to the device that will lead to its failure.

Author: «MirrorInfo» Dream Team


Print