How to make an aquarium most

How to make an aquarium most

If you decided to create a small corner of fauna at home, take care of the choice of a good lodge for its future inhabitants. The aquarium can become fine decoration of the room, create the atmosphere of tranquility and tranquility. You can choose an aquarium in shop or make it independently that will allow to save means considerably.

Instruction

1. At first decide on the sizes. It is better to order glasses in a workshop where they will be cut by the car with high precision. Thickness choose not less than 8 mm, it will be so more reliable.

2. If you refused processing of edges of glasses, make it independently, using grinding bar. During processing moisten bar in water. For gluing together use silicone sealant. Before purchase study information on a tube as on sale there are special antifungal sealants pernicious for living organisms. For usability buy special "gun" for expression. Before pasting carefully degrease faces acetone or alcohol.

3. Take a front wall and evenly squeeze out sealant on a junction which the wall will become on a bottom. After putting glue at all length of a wall, put it on a bottom. Do not press down too strongly, otherwise there will be a lot of glue. Do not delete surplus at this stage of work. Temporarily record the pasted wall. Take a sidewall. Evenly squeeze out glue on lower (will become on a bottom) and a side face (will become to already standing windshield). Put glass into place. You watch joints not to allow bevels. Make sure of quality of the pressed-down silicone layer. It is not obligatory to fix. By the same principle establish the remained glasses.

4. The aquarium has to dry out not less day. If necessary paste stiffening ribs. For this purpose overturn an aquarium on a sidewall. Grease a stiffening rib with glue from three parties. In a day, after full drying of sealant, cut off a simple edge surplus of glue on seams. When using colourless glue on internal seams you can not cut off. Fill an aquarium with water for check on tightness and leave at several o'clock. Carefully examine seams and corners. If water droplets do not appear, - all of you made truly. The aquarium is ready.

Author: «MirrorInfo» Dream Team


Print