Wi-Fi-networks are used everywhere today and for the majority it is the best way of connection to the Internet. Some users can use one plain hole to create operable access point of WI-FI even without router.
At first It is necessary to tell about what will be required to the user or the laptop, with the built-in Wi-Fi the adapter, or the desktop computer which has an USB adapter for Wi-Fi. This device, together with the computer will be Wi-Fi access point. In fact for creation of access point only these two devices are necessary, the rest will run the software.
Main settings
All actions are required to be carried out on the head computer, that is on that PC which will act as access point. For a start it is necessary to open the Start menu and to pass into "Control panel". In the appeared window to select "Network connections". Here the user needs to find a label for connection on "Wireless network connection" and to right-click on it, and in the appeared Include context menu. After start, it is required to turn into "Properties" of wireless connection which open in this context menu too. Then it is necessary to double click according to "The internet protocol (TCP/IP)". The following information is specified in settings: The IP address - 192.168.0.1, a subnet mask - 255.255.255.0. On the second computer such: The IP address - 192.168.0.2, a subnet mask - 255.255.255.0, and the main gateway - 192.168.0.1. The IP address of the first computer which is connected to network by means of a cable is entered in the field of the main gateway.
Last steps
After the settings stated above are saved, again it is required to return to the first computer. In properties of wireless connection it is necessary to open the Wireless networks tab and to press the Add button. Exactly Wi-Fi network will be created wireless here. It is necessary to remove a tick from The Key Is Provided Automatically point the appeared window and to install it on This Direct Connection Computer Computer value. The password by means of which the user will be connected to a wireless network is entered in the Key of Network field (it can be thought up independently). In a drop-down menu "Authentication" to select "Joint", and in type of encryption to select WEP. It is necessary to check the Connection tab near the Be Connected if the Network Is in Range point and to save all changes. It is necessary to do the same manipulations on the second computer then the possibility of work on the Internet on Wi-Fi will be available to the user.
The same can be repeated on all computers and laptops which are required to be connected to a wireless network.