If you needed to transmit a sound or the picture from the computer on the TV, then connection of these two devices can be the only solution here. Probably, each user of the personal computer will tell that viewing any video will be more pleasant on the TV screen. Even if to take into account that now there are DVD players, computers still connect to the TV.
It is required to you
- TV, computer, bonding wires.
Instruction
1. Today in the market of production of TVs there are several options of connection of an external signal source. It can be analog sources – S-Video, Scart, VGA and also digital sources – DVI and HDMI. It is better to give preference in use to digital sources. One more condition is maximum length of the connection cable. Connection by a cable of the HDMI standard can be up to 10 meters inclusive.
2. The quality of the picture and also a sound depends on existence of an input digital signal recently. For example, the TV of analog type will not give those parameters any more that will be able to give the TV with a digital basis. The reason for such distinction is known – analog TVs still use the cathode ray tube (CRT).
3. There are different connection cables, you need to select suitable. For this purpose it is enough to know names of connectors or to remember them by sight. The specialized shop will be able to help you when choosing any given cable. The acquired wires it is necessary to connect the computer and the TV. It should be noted that for an output of a sound it is worth using the plug like "jack 3.5". As a rule, it has green coloring. In case of connection to the computer, as a rule, tulips (white and red coloring).
4. After you connected the computer to the TV, it is necessary to configure the TV for the best display of the picture and a sound. For this purpose click the Start menu - select the Control panel item - "Screen". In the opened Properties of the Screen window go to the Parameters tab. Click an icon of the second monitor, note the Expand a Desktop point.
5. Click "In addition", pass to the Monitors bookmark, expose Harakteristiki TV.
6. Practically does not require setup only the leaving sound signal. The only thing that can be made is to adjust its volume through an applet "The general volume". Click the Start menu, select the Control panel item - "Sounds and audiodevices" - the Mixer Volume block.