Very important during creation of interior correctly to issue walls. To give to the room cosiness and to create the special atmosphere, try to paste wall-paper originally, combining and combining materials of different color and texture.
It is required to you
- - wall-paper of different color and texture;
- - wallpaper glue;
- - plinth;
- - molding;
- - rails;
- - scissors;
- - stationery knife;
- - paper tape.
Instruction
1. First of all think over general purpose of the room, choose style. Consider height of ceilings, width and illumination of walls. In high rooms think of possibility of horizontal division of walls, and in low it is better to increase visually height, using vertical strips.
2. In the living room use wall-paper of other color to allocate wall with the TV or sofa. It is also possible to allocate bed headboard in the bedroom or workplace in office.
3. To increase height of ceilings, use two or three types of wall-paper which is combined or contrast on color. Paste strips from floor to ceiling, changing them through one or two. It is very important to use at the same time wall-paper of identical thickness, optimal variant – wall-paper of one firm and the brand, but different color. It is possible to join wallpaper strips nonconventionally – for this purpose cut the edges of each leaf in the form of zigzag or wave.
4. Try to separate walls across. Wall-paper at the same time can be the different invoice, for example, from below to imitate plaster, and from above – textiles. Thickness of wall-paper can also be different as the upper and lower part will be separated by border (paper tape, molding, wooden rail or plinth).
5. Pay attention, the room is lower, the less there has to be height of the lower half. At first paste the top cloths, and below leave small stock (length of strip can decrease a little when drying). In the same way, with stock paste the lower half. After drying cut off surplus, having leveled height on floor (not on ceiling!), also glue wall-paper end-to-end.
6. If you love classic style, rococo or baroque, make inserts of thicker wall-paper. At first paste over walls with wall-paper of basic color, then cut out squares, polygons or figures from wall-paper of contrast or monochrome color and paste them atop. Frame inserts with thin levels or molding.
7. To emphasize originality of interior and to allocate certain zone, try not only to allocate it with wall-paper on walls, but also to paste over with the same wall-paper part of ceiling.
8. Way of finishing of walls, original, but quite difficult for execution: paste wall-paper rags. For this purpose pick up material of one invoice and thickness, but different color. Cut strip on squares or polygons of the identical size. Line wall and paste rags in certain order (or it is chaotic).