The Russian winter differs in duration and severe character therefore dwellings need to be warmed not only from within, but also outside. Of course, there is a wish that construction and finishing materials and work cost not really much. Mounting can be made and, it is necessary to choose the heater suitable at the price only.
It is required to you
- - heater polyfoam;
- - silicone or sealant;
- - glass wool.
Instruction
1. It is possible to warm walls by means of inexpensive polyfoam (expanded polystyrene). This eco-friendly material, safe, easy, durable, moisture resistant, non-toxic and fire-resistant. Such way of warming of the house economical and practical, works do not take away a lot of time. Polyfoam can be used for warming of the base, the basement, cellar and in places with high level of underground water.
2. Expanded polystyrene long time will keep the original form. Moreover, this material can be fixed not only indoors, but also outside that considerably will lower heat waste. Polyfoam is air-tight therefore in the winter it does not pass cold air, and in the summer in the apartment will be not so hot.
3. Cut polyfoam on equal plates or use already ready blocks. Fix by screws them on external walls of the building. It is possible to begin to warm also from internal walls. Previously working surface needs to be leveled plaster, plates of polyfoam keep within over it.
4. To warm the house, you can just change windows, balcony and entrance doors for stronger and heatpreserving. Windows pick up two-three-chambered metalplastic better. In a similar way you can change the door conducting on balcony. This difficult and not cheapest process can be replaced with sealing of windows. Put glasses on silicone or sealant, close up all slots between frames insulating material.
5. Whenever possible warm walls outside. It is great option if walls of your house are not revetted yet, but such way is not suitable for the apartment. For warming you can use mineral or glass wool. These materials have low heat conductivity, besides, they cost little.
6. After that you by means of film need to make vapor barrier. When soaking the heat-insulating properties of cotton wool sharply decrease. Do not use this material for internal works, small parts of cotton wool are unhealthy. Such heater can be applied to isolation of roof.