For the purpose of registration of interiors now cabinet furniture is in the greatest demand. In production of the innovation technologies sets of high quality, stylish design with wide range of flowers and shades of finishing materials have allowed the profile companies to create introduction and that the most important – available at the price.
It is required to you
- - screw driver.
Instruction
1. In any room, inhabited or office, the key part in interior is assigned to cabinet furniture. Whether it be the reception or the head's office, and can kitchen, the bedroom, the children's or guest room, everywhere there will be place for installation and assembly of home decoration, both set entirely, and its separate modules.
2. Main objective by production of cabinet furniture is providing consumers with the maximum comfort, and to occupy at the same time the minimum area. Even in the small room in which it is necessary to place wall or the hill, or set of upholstered furniture and other thanks to design thought it is possible to create illusion of the spacious room taking into account all wishes of the buyer.
3. To create individual style in each room during purchase it is possible to choose headsets of various flowers and materials of finishing of facades among which except traditional solid wood polymers, glass and metal are widely used. Special attention needs to be paid not only to quality of production of separate components of cabinet furniture, but also accessories by means of which it gathers.
4. The acquired purchase is delivered to the knock-down consumer. Each module is packed separately (the scheme of assembly is surely attached), and only the accessories with fixing hardware for all set will be in one bag.
5. After assembly and installation of furniture there comes the most crucial moment of adjustment of arrangement of facade components: doors of cabinets, covers of boxes, mirrors and other. General impression of visitors at the time of visual examination of interior of the room depends on their faultless placement.
6. Each loop by means of which doors of various lockers are hung is supplied with two bolts: one – fixes it; another, adjusting, located inside – changes facade component tilt angle.
7. For elimination of distortions on loop the mounting screw, and depending on to what party it is required to give door is released, adjusting – twists or gets out then the adjusted accessories are fixed by inhaling of the first hardware.
8. To reduce excessively wide slot between doors, mounting screws are released at all loops then adjusting – twist, and the provision of decorative element of facade is fixed by the hardware which is released at the beginning of the procedure.