After a while the metal door begins to squeak. It is possible to solve this problem in several ways. It is possible to call the expert, but he should pay some sum of money. If there is no such opportunity, then it is possible to be engaged in its adjustment independently.
Instruction
1. It is necessary to stock up with box wrench on 17, hexagon and WD-40 lubricant in advance. For a start it is necessary to examine steel shutter attentively. You have to find the reason of skip and the place where it arises. Can creak adjustable loops. Also the sound can arise because of friction of door cloth about door.
2. If loops are the reason, then, most likely dust has got to them. Most often it occurs if in the house construction repair works were performed. To get rid of scratch it is necessary to blow loops and to grease with WD-40 lubricant. At the majority of metal doors the angle of opening makes 180 degrees. It is also necessary to blow and grease also internal loops.
3. If the outer door passes drafts, cold and noise, then it is necessary to use rubber sealants for repair. They are on sale in the construction markets. It is also possible to get them in shops of construction materials. It is the best of all to use thin sealant. It is pasted from the inside of door on warming contours. It is necessary to glue only in those places where there is no dense contact of door and sealant.
4. Often there is noise because of friction of door cloth about door. In this case it is necessary to examine door on availability of visible scrapes. It is also possible to listen from what place the noise is published. Further it is possible to pass to adjustment of door. For a start it is necessary to weaken average loops, and then the top and lower loop. After that the cloth needs to be moved up or delayed to box. The nut at extreme loop drags on. That loops have taken the place it is necessary to poshatat door. Open and close door. If there is no noise, then it is possible to tighten all loops well. If it has not disappeared, then try to adjust it once again. If work is performed qualitatively, then the metal door will cease to creak. You can enjoy silence.