The unusual name of paint - rubber - is connected with its feature to be turned in tubule, to be bent and not to break at the same time. Also it can stretch slightly, bearing a faint resemblance to these to rubber. Such paint does not contain poisonous components, does not burn and does not irritate the skin, mucous covers and airways.
It is required to you
- - primer;
- - brush;
- - roller;
- - water;
- - capacity.
Instruction
1. The acrylic polymer forming the paint basis has the increased weatherability. Correctly laid rubber paint is not wiped even in places of intensive mechanical influence in the conditions of the street. It is used for covering of the tennis courts, racetracks, pools, roofs, sites adjacent to garage, etc.
2. Prepare surface. Clean it, if necessary level and process primer. Use acrylate soil impregnation which strengthens any porous and old surfaces.
3. Correctly to pick up the necessary consistence of paint, part it in small amount in glass of water. The received solution make trial vykraska of the small site of the surface prepared for coloring. Check consumption of paint and speed of its drying. Try to apply paint by means of various tools: wide brush (flat brush), roller.
4. For convenience of work put on brush or the roller long stick (from 0.5 to 1.5 m, depending on the size of the painted surface). It considerably increases the speed of painting of object and reduces risk to be soiled with paint. Covering vertical surface, you apply paint at first on upper part of wall, then – on lower.
5. For convenience provide step-ladders or reliable support (gantry, table). Paint with wide waves, carrying out no more than one-two times in one place. Before drawing the following layer surely wait for drying previous. Otherwise paint can stick to brush and be reeled up on the roller.
6. At once eliminate smudges and drops with damp rag (but not wet). For removal of the dried-up paint from clothes, wash it with soda. Wash tools, hands and container water with soap or with laundry detergent.
7. If you have found out that after covering through paint dark stains appear, cover them from above with acrylic prime coating, putting it in three layers, or put varnish coat. From above paint over this place paint.