The problem of electricity supply of portable electronic instruments is pressing. Especially sharply it is felt when you leave from sockets and other stationary sources of the electric power not for one or two days, and for week. In that case the small self-made generator will come to the rescue.
It is required to you
- - coil from spinning;
- - wire;
- - glue;
- - plastic disks with a diameter from 2 to 3 cm or big pass;
- - elastic band;
- - the melting silicone;
- - motor with pass;
- - multimeter.
Instruction
1. Disassemble the coil for spinning. For this purpose press the button on the coil with fishing line and remove it, and then pull out spline and remove nut. As a rule, all coils understand quite so, but if it is impossible to you, address to shop of fishing tackles where to you surely will help to sort product.
2. After that remove the rotating mechanism.
3. Take the motor and attach on the coil, having installed it on leg and having clamped two pieces of wire. Try to capture wire both the motor and the coil.
4. Stick the place of contact of the motor and leg.
5. Cut fillet at edges of plastic disk in order that the elastic band did not fall down, and in the center make opening on diameter of axis of the coil (one of options of such disk - pass from the old washing machine). The disk needs to be established on the center of the coil and to level (for this purpose it is possible to use paper or the melting silicone).
6. Pull elastic band between big and small pass of the motor.