The good greenhouse – perhaps, dream of many inveterate summer residents. In spite of the fact that it is possible to buy already ready greenhouse, some prefer to manage by own efforts. Build on the personal plot the qualitative greenhouse which will serve to you for many years and will bring excellent harvest.
It is required to you
- - shovel;
- - sand;
- - gravel;
- - armoring lattice;
- - concrete;
- - galvanized profile;
- - cellular polycarbonate;
- - self-tapping screws;
- - windows;
- - door;
- - electric heater.
Instruction
1. Construction of the base is the most labor-consuming part of work. Reliability and stability of all design depends on the base. First of all it is necessary to choose correctly the place on the site for construction of the greenhouse. It has to be lit well with sunlight, not get under shadow of trees or buildings.
2. After the choice of the place start excavation of trench on perimeter of future greenhouse. Depth of trench has to be 40-50 centimeters. Fill up bottom as pillow with sand on 5-8 centimeters, stamp. Then make ten-centimetric binding gravel. In conclusion lay rods of armature or armoring lattice and fill in with concrete.
3. The next stage of construction of the greenhouse – installation of framework. Most often the framework is done of metal or tree. It is recommended for these purposes to use galvanized profile or steel pipes, they long do not rust and do not decay that cannot be told about tree. Greenhouses in the form happen in the form of arches or lodge. The form of design depends on the used material (the reinforced polyethylene film, glass, polyethylene film and cellular polycarbonate).
4. Among summer residents the greenhouse from polycarbonate cellular enjoys the greatest popularity. This modern material is much more durable than normal polyethylene film and glasses are much cheaper. If glass is applied to construction of the greenhouse in the form of lodge, then cellular polycarbonate is used for creation of the arch greenhouse. Sheets of cellular polycarbonate fasten to framework by means of self-tapping screws.
5. Establish ventilating windows on ceiling. At the same time drafts will be excluded, and the full provetrivayemost will be provided. Take care also of installation of door and heating of the greenhouse (usually greenhouses are heated by ovens potbelly stoves or electric heaters).