How to establish bathtub independently

How to establish bathtub independently

It is the best of all for Vann to have at distance of 50-60 mm from wall. In terms of convenience, more practical are vertical-sided bathtubs. Before installation surely examine covering. Pay attention to correctness of inclination of bottom.

Instruction

1. It is necessary to establish bathtub on equal, horizontal floor. Legs or reinforced concrete supports have to serve as support. After installation of bathtub to the necessary place you can pass to connection of siphon. You can use V-shaped or flat folding model. It is also often possible to meet siphon which the water admission which is built in modulation grid which is intended for filling of bathtub has. It is necessary to attach funnel with modulation and water drain to siphon and also pipe for water drainage. The connection pipe can be flexible or rigid.

2. Before mounting the siphon needs to be sorted. First of all the sshivny funnel is established. For this purpose it is gentle to you to insert funnel grid into drain hole. Under it surely substitute plastic or metal clamping ring which has rubber sealant and fastening bolt.

3. Further combine bolt with threaded hole of grid of funnel and tighten it by means of horn wrench. You watch that the mating ring was not displaced. After that you need to install the T-coupler. For this purpose substitute it to external thread of clamping ring of funnel of draining and record nut. Consider, side withdrawal of the T-coupler has to be oriented towards wall. It also has to be densely pressed by clamping nut.

4. After that apply modulation grid to modulation opening. Reliably fix it. Discharge pipe have strictly vertically. Try on sleeve which connects the T-coupler and pipe of modulation and adjust longwise. Fasten one its party to side withdrawal of the T-coupler by means of clamping nut, and just put on the second modulation pipe.

5. Establish discharge pipe of siphon in bell. Previously has to be the rubber ring is established. Fasten siphon to the T-coupler. Gather a little water in bathtub and check tightness of all connections.

Author: «MirrorInfo» Dream Team


Print