Now use of roller guides is very widespread, almost in each house there are computers which, as a rule, are installed on special computer tables. The design of computer table provides the leaving shelf under the keyboard. Besides roller guides are applied at production of sliding boxes with closers and also in sliding wardrobes. It is possible to collect this furniture by the hands, the main thing is to establish roller guides correctly.
It is required to you
- - pencil;
- - drawing of furniture;
- - drill with drill;
- - screws;
- - roller guides.
Instruction
1. On the basis of the drawing of furniture execute exact marking on box where elements of roller guides will fasten.
2. Drill not through hole under the screw (depth at least has to be 14 millimeters). Then make two more same openings: their arrangement to each other is determined by the relation by the drawing.
3. Arrange on box element of roller guides so that the end of this part on which there is no wheel rested against front wall of box. Respectively, the roller has to be located at back stenochka of box. Fix roller guide, using the screws going in set, or independently picked up screws which hat should not go beyond guide more than on one millimeter. Attach the directing element and from the second party of box.
4. Pass to installation of roller guides into locker. Arrange guide so that it was perpendicularly in relation to cabinet facade, however the roller of guide has to be located in front. Practically all guides have round and also a little extended cuts provided for screws. When mounting roller guides in cabinet use the extended cuts as with their help it will be easier to adjust the movement of the leaving box.
5. Do the above procedure and from the second party of niche in which there will be box.