The built-in oven is device of high power which allows to regulate temperature condition and to prepare practically any products. Ovens are provided in trade from different producers and at various price. Mounting mode at all cabinets identical.
It is required to you
- - wiring 4 squares;
- - submachine guns 32 A.;
- - socket 32 A.
Instruction
1. Before beginning mounting, buy copper wiring with section 4 quarter. Length of wiring has to correspond to connection from guard to oven. Also get two automatic systems of control shutdown at differences of tension or accidental short circuit and the socket with the 32 grounding system And.
2. Study the instruction of mounting from the producer. Establish oven in the intended niche in complete kitchen. You can establish oven in any place, and not just in special niche, the main thing establish it exactly, at convenient height. Record legs lock-nuts. At alignment of cabinet by means of level try that legs have been unscrewed minimum. Behind cabinet leave distance from wall not less than 30 cm. From that as far as you will correctly make alignment of cabinet, the uniformity of preparation of all dishes and stability of work of heating coils depends.
3. Switch off the central guard on stair landing. Carry out separate wiring. Put automatic machines in the guard. Connect oven also via the system of circuit breakers as quite often there are situations when automatic machines need to be switched off immediately, and to run on the landing pretty far. Install additional automatic machines between the socket and oven. The system of circuit breakers is provided in some models of ovens by the producer therefore installation of additional system is not required.
4. Fasten the socket. Connect grounding. If in your apartment the grounding strut is not provided, and it is made in the majority of apartments of new type, then attach grounding on the iron pipe going to the earth. Do not connect grounding on water pipes or on heating services at all.
5. Invite the professional electrician for check of correctness of connections and all mounting of feed system of electricity as at the wrong mounting there can be short circuit that threatens with ignition and defeat by electric current.