Installation of vertical blinds is rather simple and does not demand special skills or the equipment. However, some nuances when mounting blinds after all exist. But if you have got used to do everything in the house by the hands and surely handle the screw-driver and the perforator - you will be able quite to establish vertical blinds independently.
It is required to you
- - screw-driver;
- - perforator;
- - drills;
- - scissors;
- - hammer;
- - set of fixture;
- - hacksaw
Instruction
1. Choose way of installation zhalyuzisledut the nobility that vertical blinds can be established on window opening by three in different ways - separately on each shutter of window, in window opening, with an overlap. In case of installation of blinds directly in window opening their height has to be 2 cm less, and width - on 4 cm, the corresponding sizes of window opening. It is also necessary to leave some distance between blinds and the upper edge of window. It is required in order that there was opportunity to open window for airing of the room. At installation of blinds with an overlap the sizes of blinds have to exceed the sizes of window opening on 10 cm in case the window is deepened in wall. If the window is located flush with wall, for fastening of blinds it is necessary to use brackets. It is necessary in order that the handle of a window did not interfere with use of blinds. At this type of fastening width of blinds has to exceed width of window opening on 20 cm. Length of blinds, as well as in the previous option, has to be 10 cm more than height of window opening. When mounting blinds directly on window shutters width of blinds has to exceed shutter width on 3 cm.
2. Adjust blinds to the necessary sizes. For this purpose cut off vertical blinds by means of scissors. If necessary truncate the operating rail by means of hacksaw.
3. Mark places of fastening of blinds. Make sure that fastenings and the blinds established on them will not interfere with work of barrier turning gears of your window.
4. Establish fixing clip-on earrings on wall or on ceiling by means of self-tapping screws. It is necessary to consider that fastening elements have to be mounted at distance of at least 60 cm from each other.
5. Record eaves, having latched it on fixing clip-on earrings.
6. Insert lamels into runners. Insert the making heavier plates into podgiba of lamels. Connect plates by means of decorative chain to external and inside. Check operability of blinds.