How to hammer nail into bottle

How to hammer nail into bottle

In life often there is need to hammer nail into any given place for definite purposes. How to hammer nail into wall, it is known to all, and this procedure does not cause any difficulties. But sometimes for some purposes it is necessary to hammer nail into the bottle made of glass that already sounds much more difficult.

Instruction

1. So, if you need to hammer nail into glass bottle, and near at hand you have only normal hammer, make the following. Gather full bathtub of water, is only not hotter. Lower in it bottle and slowly begin to hammer nail by means of the hammer. In such conditions glass is not exposed to strong influence therefore does not burst and does not burst. Be careful not to injure fingers of hands as it is a little more difficult to hold bottle in water, than usually.

2. If you had had need to nail up bottle, for example, to tree, then perform the following operations. You need a little patience and skills, but usually such procedure does not cause special difficulties. So, for a start in bottle through neck thrust wire. After that undertake hand longer end of wire and you will hang out bottle on the edge resting against bottle wall from within.

3. Accurately opposite to this edge begin to tap slightly on bottle wall with small stone. Strong you hold stone in hand that it did not dangle. Opposite to edge, glass has to begin to crumble and burst a little. After a while you will see the formed hole. Turn bottle other party so that before you the place was accurate opposite to the first opening. Do with it the same procedure, as with the first. You watch that the opening was the size strictly about diameter of nail.

4. Now push nail through openings and accurately beat to tree. The main rule – do everything slowly, but it is sure. Do not make sharp and rough movements as glass can sharply crack or break.

5. If such option at you absolutely cannot be carried out, use small cunning. Just hammer nail directly into tree and bend it flat-nose pliers. Choose nail of average or large diameter that it could sustain bottle. Now just hang up bottle on the bent nail, using wire for loop or any other improvised materials.

Author: «MirrorInfo» Dream Team


Print