Depending on board weight, various solutions of this task are possible. Boards can be cutting, information, cool (educational), ironing and construction. There are still chess and commemorative plaques. Let's consider the most often found situations, that is we will define how it is possible to hang up cutting or message board. Though for other boards the same principle.
It is required to you
- - perforator;
- - center punch;
- - drill;
- - hammer;
- - dowel and screws of diameter corresponding to board weight;
- - tape measure;
- - level;
- - bilateral adhesive tape.
Instruction
1. Heavy to doskazamerta distance tape measure between centers places on which the board is suspended. These places represent the metal plates with groove fastened from reverse side of board. Under plates there are deepenings in board body – in them the screws which are sticking out of wall when the board is hung up into place utaplivatsya.
2. By means of tape measure and level mark on wall of the space of drillings for fixing openings.
3. Plan on wall the centers of openings blow of the hammer to center punch. As concrete – non-uniform structure, it will not allow drill to go aside to time of drilling of openings.
4. Drill necessary quantity of fixing openings – by the number of fastenings in board. Openings have to be in main wall (wooden, brick or stone). If walls are sheathed by decorative material – it is necessary to drill it through and to go deep on dowel height into main wall (plus five millimeters). In some cases the board fastens bolts through through holes in wall (it is fastened by nuts on the other side of wall).
5. Hammer dowel and twirl screws so that on them it was possible to hang up board – they have to act a little from wall.
6. Hang up board into place, having checked horizontal position level.
7. Easy magnetic to doskapodgotovta of strip of bilateral adhesive tape of the necessary length.
8. Paste adhesive tape to reverse side of board, previously having removed protective paper on the one side of adhesive tape.
9. Remove protective paper on the other side of adhesive tape and attach board to wall.
10. These boards can be hung up on wall and through fixing openings. Drill opening in wall, hammer into it dowel.
11. Hang up board on one screw and mark other fixing openings on wall. It will provide horizontal position of board after mounting.
12. Drill other fixing openings in wall, hammer dowels and fasten into place board.
13. Well and at last, such board can be suspended on beautiful tape on one central screw or nail.