Fastening of eaves for curtains is carried out to outer end of aperture of window, at the same time from two parties from aperture edge brackets between which distance depends on curtain width are placed. The procedure of suspension of eaves something is similar to fastening of door platbands as both in the first and in the second case it is necessary to remember electrical wiring. Before starting fastening of brackets, it is necessary to use detectors of the hidden not uniformity. They will help to find the venue of electrical wires and to define arrangement of racks in wall, having designated it by sound or light signals.
It is required to you
- Eaves and spare parts to it;
- Stairs;
- Tape measure;
- Pencil;
- Dowels plastic and screws of the corresponding size;
- Screw-driver and hexagonal wrench;
- Construction level.
Instruction
1. Take tape measure, and the help it measure length of window opening, mark with pencil the place where brackets are located. Apply bed plate to the left mark and, having pushed pencil in openings under screws, also make marks.
2. Take drill on concrete and drill openings about 50 millimeters in depth under bed plate of the left bracket. Now you can insert dowels, put bed plate to wall and fasten it by means of screws.
3. Insert bracket into the slot of plate and fix by screwing in it fixing small screw by means of hexagonal wrench or the small screw-driver.
4. Having hung up eaves on the left bracket, insert crossbeam into right. It is necessary to look, the eaves will hang how exactly.
5. Fix the right bracket on wall.
6. Put on rings eaves, having set aside two extreme on its ends.
7. Attach eaves to the right bracket. As soon as make sure that the eaves hang exactly, you can tighten mounting screws.