The centralized providing with hot water is not in any area. And in the cities, scheduled maintenance and accidents can lead to long cutoff of hot water. Therefore today not superfluous will be to install the water heater in the house.
Study the mounting instruction of the water heater attached to product. It contains important information on rules of connection and installation of the device. Ignoring of these rules can lead to damage of the device even prior to its operation or to emergence of emergencies in the course of work.
Choose the place for installation of the water heater. It has to conform to all requirements stated in the mounting instruction. By all means pay attention to that to the chosen place it was possible to carry out easily and safely laying of separate three-conductor voltage cable, water supply pipes and also pipes of distribution of hot water to water folding points. At the same time, if the wall water heater of accumulative type having rather large volume is installed check durability of wall on which it will be fixed.
Prepare the place chosen for installation of the water heater. If the device has to be mounted on wall, according to the instruction note fixing points. Then by means of the perforator or drill on marking drill in opening wall, screw in them anchor bolts or hammer plastic dowels and screw crutches.
Install the water heater. Strongly fix the wall device fastening elements and check reliability of mounting. Concerning the floor device check lack of considerable side roll, having used construction level. Connect the water heater to network of power supply, having laid from distributive guard to the device separate three-core wire. Choose its section and type, being guided by indicator of the maximum consumed current. Recommendations to supply leads are often provided in the mounting instruction. Carry out connection of the water heater via the automatic safety lock. Surely ground the device, having connected to it the corresponding vein of wire and having connected it to the grounding bus in electric guard. Connect the water heater to water supply system and also water folding points. Follow indications of the mounting instruction. Today for connection of water heaters both flexible, and firm metal, metalbedded or polypropylene pipes are used. The flexible eyeliner is considered unreliable, and its application should be avoided.