Today, in specialized shops there is huge choice of various sports equipment including children's sports corners. But only you know features of the apartment and, therefore, nobody better you will be able to issue sports corner which will ideally fit into interior and the sizes of your room. Besides, doing sports corner by the hands, you will be able to consider all wishes of your child and to make those shells of which he dreams.
It is required to you
- - wooden bar 5х14х300,
- - boards with the section of 30х80 mm,
- - shanks under shovel,
- - iron corners,
- - screws,
- - glue,
- - saw,
- - drill,
- - abrasive paper,
- - rope or rope,
- - piece of steel pipe,
- - hacksaw,
- - rings,
- - carbines,
- - metal rope
Instruction
1. Take boards and carefully process them plane, and then grind abrasive paper. Collect from boards framework of future complex. Frame members are fastened among themselves to the help of glue and screws. Vertical racks fasten to floor, by means of metal squares. The top frame of framework fastens to walls by means of long screws and dowels. For accession of racks to the top binding of framework, on them it is necessary to choose grooves, as 30х80 mm in size. Pay special attention to crossbeams in the top frame of framework - their diameter has to be not less than 40 mm as on them apparatuses will fasten.
2. LestnitsaS the help of drill, make openings for crossbeams in two racks of framework. Openings have to be located at distance in 20 cm from each other. Saw shanks and insert into the prepared openings, previously having greased with glue. Wait for glue drying.
3. Rope to lestnitsarazrezhta shanks from shovels on bars, 45 cm long are steps of future ladder. Drill two openings with a diameter of 10 mm in each step. Openings need to be drilled at distance in 24 mm from each edge of step. String steps on ropes and record them from below and from above in knots. The distance between steps has to make 20 cm. Cut out from steel pipe of ring of the corresponding diameter and get them on the ends of steps.
4. Gymnastic you trapetsiyavozmit crossbeam 70 cm long, with diameter of 35 mm. The crossbeam can be both wooden, and metal. Drill, at distance in 5 cm from the ends of crossbeam, two openings with a diameter of 10 mm. Insert linen rope into openings and record by means of two knots. Attach on the bearing crossbeam by means of rings and carbines.
5. Gymnastic koltsagimnastichesky rings can be attached to one of the bearing framework crossbeams by means of the suspender from rope.
6. Rope wall "spider line" Make grooves of 10 mm in depth in vertical racks of frame. Drill openings with a diameter of 8 mm, at distance of 100 mm from each other. Fasten the top ends of racks with additional cross crossbeam. Make the same openings in cross crossbeams. Through the made openings stretch linen rope. Miss one rope in the vertical direction, and the second - in horizontal. Ropes have to be hardly tense and fixed in places of crossing and also in initial and final points by knots.