How to make bed machine

How to make bed machine

The imagination of children changes normal objects. Can set result and keep the fairy tale in life of the kid parents. If your son dreams races and dreams to become the driver of race car, give the child's beds type of the real car, using its old framework and boards chipboards.

Instruction

1. Its standard box is the cornerstone of unusual bed. Collect it by the hands or use old nursery bed.

2. Together with the child make the sketch of future machine. It is possible to take any model of the car which is pleasant to your kid as basis. Approximately having outlined it on leaf, extremely simplify its exterior. As a result recognizable outlines have to turn out simple, but at the same time. Get rid of sharp angles and small parts in sketch.

3. On the basis of the sketch make the drawing of new "covering" of bed. Take measurements of berth. Length, width and height of decor in the form of the machine has to exceed the corresponding parameters of bed on 3-5 cm. Also according to approximate proportions of the chosen model of the machine determine other sizes of the drawing.

4. Transfer the drawing to veneer sheets or chipboard whom you will sheathe bed. Try to have each of car parts on single sheet. Cut all parts and mark them with letters or digits not to be mistaken at assembly. Process all edges of fragments of the machine abrasive paper that on them there is no roughness left and splinters.

5. Being verified with the sketch and the photo of the car, apply on the prepared parts marking for coloring. By simple pencil designate borders of sites which will be filled in in different color. Paint the machine with acrylic paint. To find necessary shade, mix basic color with color in separate capacity. You apply paint on big surfaces by means of the roller. Then paint small parts with rigid brush. Cover the ready and completely dried preparations with one-two layers of glossy acrylic lacquer.

6. Fix machine elements on bed framework. Fasten them in turn by means of self-tapping screws so that places of fastening were not evident and looked organically. If any part of bed looks out from under automobile decor, paint it under color of the next part to disguise.

Author: «MirrorInfo» Dream Team


Print