Metalprofile, it is professional flooring - modern economic material which scope the most various - from economic buildings and roofs, to fences and gate.
It is required to you
- - rod posts, profile pipes with a section of 60×60 mm are more often used;
- - cross logs (crossbars) from profile pipe section 40×20;
- - sheets of metalprofile;
- - fixing materials;
- - perforator;
- - welding machine.
Instruction
1. For a start it is necessary to decide on type of profile metal sheet. The profile leaf is the metal sheet which has undergone special processing by rolling. As a result of processing it also receives necessary configuration of profile – to corrugation of various height from 8 to 114 mm. the form of crepe paper can be wavy, trapezoid, square, rectangular, difficult. Color of leaf is also created in the course of production. The choice of leaf of a specific type is result of mainly own taste, it does not influence quality of fence
2. Previously measuring works during which the necessary number of sheets of professional flooring, rod posts, quantity of expendable materials is investigated are performed. In the course of measurement also the configuration of future protection is defined. Depending on the planned height of fence height of support, taking into account the subsequent deepening is chosen.
3. In order that the fence had stability and was durable, it is necessary to decide on nature of the soil. The technology of mounting of design also will depend on type of the soil. The easiest and available way – blockage of rod posts, but it is suitable for the low designs which are not creating heavy loads on load-carrying structures. It is reasonable to apply way of butovaniye by means of sand and cement mix to peat and clay soils – mix gives all the best on hole bottom, on pillow the rod post is mounted, the design becomes stronger soil. The most rugged construction will be created by the concreted support. Support should be established on depth from one to one and a half meters, step of rod post – no more than 2.5 meters.
4. On support in the horizontal direction logs, not less than two pieces on section are welded. On logs self-tapping screws sheets of professional flooring fasten. Sheets are imposed at each other with overlapping in one wave. Final – painting works. If in construction of fence the metalprofile with polymeric covering was used, then it is necessary to paint only columns and logs. In need of fence from metalprofile it is possible to cut gate, but it is already more difficult technology.