To adjust lighting in the apartment or the house, it is necessary not so much – cable, several simple lighting equipment, the switch and accessories for mounting of electrical wiring. To get all this is not the problem at all. The main complexity is in that, establishing lighting not to work counter with laws of physics and to follow all safety instructions.
- Branch cable of necessary length, lighting switches, sockets, the branching boxes, electric tool, one or several lighting equipment
1. Make marking of those surfaces on which you are going to lay cable. It is necessary "to dance" from distributive guard. From it there will be the main line of electrical wiring in the house or the apartment. It is necessary to mark places in which you are going to mount lamps, switches, sockets and the branching boxes.
2. Prepare all necessary materials for installation of electrical wiring. Take care of that during works you had sufficient stock of cable of that brand which you use, it is quite good to have near at hand also spare lighting switch and the socket. If wiring is closed, "Bulgarian" for strobleniye of the channel in wall is required if open – homutka for fastening of cable.
3. Prepare for mounting of electrical wiring of surface on which there will pass the cable and on which fixed lighting equipment will be placed. Leaning on the marking made earlier, vyshtrobita in wall and ceiling of the trench for electrical wiring and also drill slots under adjusting boxes.
4. Mount in wall (or on wall if wiring open) the cable going from distributive electroguard. The branch cables going to switches and sockets (vertical "descents") should be connected to the main line by means of twisting, carrying out connection in the branching box. The chandelier or the lamp should be connected to wiring in the last turn, previously having installed switches and sockets.