The putty is pastelike or dry mix for drawing on surface of walls. The putty is made of different bases, for example, of plaster, cement, by drying oils to which in addition add fillers and pigments. The putty can be made independently.
Instruction
1. Putty on tree. Prepare PVA glue and small sawdust. Get small capacity to prepare there solution. Lay out sawdust in container and fill in with glue. Carefully stir everything to consistence of dense sour cream. Let's it dry up within 15-20 minutes. The putty is ready.
2. Putty on concrete. Prepare chalk and drying oil. Get container of small capacity. Mix chalk and drying oil in capacity. Carefully stir everything to density of sour cream, let's it grab and dry up a little. The putty is ready.
3. Putty under painting. Prepare 15 percent solution of glue, drying oil, turpentine, laundry soap, chalk, casein paint. Prepare capacity. Dilute casein paint with water and warm up up to the temperature of 60 degrees then filter through sieve and pour in drying oil, and then the chalk wetted in water, laundry soap and turpentine.
4. The same putty can be made from a few other structure. For this purpose instead of casein paint use glue on the same basis. At first mix dry powder materials: chalk, pigment, laundry soap. And then add liquid materials: casein glue, turpentine, drying oil, varnish. Carefully stir everything and let's infuse to viscous consistence.
5. Select color of pigment for putty depending on paint with which you will cover surface that on wall spots and stains did not act. To pick up the correct color and percent of pigment in consistence of putty, apply it on the small site of wall, let's dry up and from above coat.