The greenhouse established on the base – construction stronger, reliable and durable. Its design does not contact to the earth and serves much longer. Besides the base allows to maintain optimum temperature in base layer that is the most important when landings. The base can be established in several ways.
Instruction
1. Most rasprostranennyt vids the base at installation of the greenhouse – melkozaglublenny tape and on sale or going complete with the greenhouse metal.
2. The greenhouse is easy construction therefore to establish the powerful base there is no need. In certain cases establish the brick base from the remained material after socle laying at construction of the house or garage. Any of views of the base is rather reliable for the subsequent installation of the greenhouse as the main thing at laying is to make the dense basis which is doing not pass cold air and to raise construction for isolation from contact with the soil.
3. For installation of the metal base bought separately or going complete with the greenhouse attentively read the installation instruction and make assembly of the basis according to the instruction.
4. Establishing the brick base, dig out small trench and put brick on solution slightly more widely than the design. The eminence over the level of the soil has to be 30-40 cm. It is enough for installation of structure of the greenhouse to protect framework from contact with the earth and to improve microclimate in the greenhouse.
5. For production of continuous footing dig out trench 15 cm wide, depth make 30-40 cm.
6. Establish timbering higher than the level of the soil on 30-40 cm and flood the base with concrete solution.
7. Solution can be made independently or to get ready in mixers.
8. For solution make concrete in the ratio of 1 part of cement of brand 400, 3 parts of bank sand and 3 parts of small crushed stone.
9. On the base, in all cases of production it is necessary to lay layer of waterproofing and after that to establish greenhouse framework.