Installation of the elevator in the private 2-3 floor house traditionally is considered invention expensive. But if desired to construct the service lift the hands not so difficult. And material inputs as it appears, are not so big. Construction of such elevator will take you only a couple of days, and such design will serve several years, helping you and at construction of upper floors, and after completion of construction of the house.
It is required to you
- - metal corners;
- - metal section;
- - metal sheet;
- - armature;
- - wheels;
- - telpher;
- - welding machine;
- - concrete;
- - the rubberized wheels.
Instruction
1. Make the platform of the elevator. For this purpose make framework of metal section and weld on upon it metal sheet and armature. Armature will become further basis for handrail of your elevator.
2. Buy the telpher. It is necessary to choose it, proceeding from the desirable loading capacity of your elevator. It is recommended to choose the telpher with the extended wire of management. Then you will be able to operate the elevator both from lower, and from the top point.
3. Prepare supporting structure. As a rule, as support for the elevator serves the wall. It should be noted that only the load-carrying structure can serve as reliable support. It is desirable to strengthen at stage of construction this wall armature. If there is no such opportunity any more, it is recommended to strengthen wall additional cross partition. The floor support of the elevator is made of concrete.
4. Make runners of metal corners and fix them on wall at an angle in 60 degrees. Assign corner also on wall and gender, in the place of support of runners of the elevator. For strengthening of structural strength the runners and corners are recommended to be welded.
5. Weld the rubberized wheels on the platform.
6. Weld crossbeam in the highest point of design. Strictly fix the telpher on this cross-piece.
7. Sheathe your chipboard elevator or metal. Establish handrail on perimeter.