The hidden illumination of ceiling can be made in two ways: with use of luminescence and neon lamps or LED tapes. To make illumination fluorescent lamps or neon tubes, stretch wiring, having established lamps in the prepared fastenings. Establish the LED hidden illumination, attaching laziness on double-sided adhesive tape.
- fluorescent lamps, neon tubes, LED tapes, single LEDs.
1. Previously make in the room tension silt false ceiling which has small technology gap. For fastening of fluorescent lamps or neon tubes, establish fastenings, having fixed them on ceiling, hide wiring behind stretch or false ceiling. Establish lamps, using electronic, but not electromagnetic ballasts which provide the smaller mass of design and also simultaneous fast start of all lamps. At installation of such hidden illumination be careful when mounting do not use combustible materials as the high tension necessary for start of fluorescent lamps can become the ignition reason. For cheapening of design it is possible to use the white fluorescent lamps which are pasted over with special colored film.
2. For mounting of the LED hidden illumination use LED tapes. For this purpose to zachistta mounting surface, remove film from surface of tape and press it to this surface. That tape it was not visible from below, on ceiling make special ledge of type of eaves in which upper part you fix tape. The distance from eaves to ceiling has to be such that light did not manage to be scattered strongly and at the same time that separate diodes were not visible.
3. When mounting do not bend tape, their minimum swivel radius has to be 2 cm. At connection at first connect the controller but only then - LED tapes, observing polarity to source of current. When mounting do not use in serial connection of tape more than 15 m long, otherwise too big current on the first diodes will force them to fail too quickly. Therefore use several tapes up to 15 m long for registration, connecting them to energy source in parallel. For registration use single LEDs, having them in the conceived order.