Doors of fridges of Indesit are usually hung on the right side. If planning of the room does not allow to open door at the right hinge plate, it needs to be moved. Practically each modern producer releasing fridges allows to make it.
It is required to you
- - screw-drivers (normal and figured).
Instruction
1. Make sure that the door of your fridge can be rearranged. Examine the fridge. You have to find plastic stubs which are intended for fastening of the handle and also the rotary loops located on door. On the fridge body also there have to be fastenings.
2. Disconnect the fridge from power supply to secure themselves against blow by current.
3. Exempt the fridge from all products and remove shelves.
4. Remove the door handle.
5. Remove stubs from door, using flat blade screwdriver.
6. Turn off fastenings from the fridge, holding its door.
7. Accurately remove fridge door.
8. Turn off rotary loops from door. From the opposite side of door remove stubs of openings for loops.
9. Fasten loops to the opposite side of door, specularly previous to situation.
10. Find stubs under rotary loops on the left side of the body of the fridge. Take out them, then rearrange in openings on the right side which were used earlier.
11. Put door to the fridge, fasten loops. Adjust them if it is necessary.