You have decided to give "the second life" to old strong complete kitchen. Quickly and simply it can be refreshed by means of coloring. Furniture for kitchen often is exposed to different chemical influences therefore it is better not to use acrylic paints and varnishes. Other paints and varnishes have very strong smell so it is necessary to work indoors with open window or good ventilation.
It is required to you
- - alkyd enamel or autoenamel;
- - abrasive paper;
- - primer;
- - roller and brushes;
- - glizal.
Instruction
1. Decide what color your future complete kitchen will have. Think whether you are ready to change curtains, upholstery on soft corner. As different useful trifles which are exposed in sight, with the new painted surface will be combined. It is better to resolve these issues of the house, then in hardware store it will be necessary or to buy you ready alkyd paint, or to tint it in the picked-up color at experts.
2. Remove facades from all lockers. That paint was without smudges, it is necessary to work at horizontal surface. Side panels at furniture can be painted on the place, having enclosed film or newspapers under lockers, then it is not necessary to wipe also floor from splashes. Stick those places which are not subject to coloring with painting adhesive tape.
3. Unscrew from facades of the handle and loop. If in doors there are glasses, try to pull out them. Or put the newspaper on glasses and fix it by painting adhesive tape on perimeter that paint has not filtered.
4. Fix fine-grained abrasive paper in the special holder or envelop it small bar not to injure fingers at oshkurivaniye of complete kitchen. Grind framed parts and fixed decorative elements, pressing nazhdachka fingers or having fixed it on rail. If on doors there is MDF film, pick up it in corner and remove from all surface before processing by abrasive paper.
5. Ground furniture. If at your facades plastic surface, pay attention to special primer for plastics. Normal primers under paint will be suitable for wooden doors and from chipboard.
6. Paint big surfaces with the velor roller or from airbrush. But during the work with the spray small practice is necessary, previously be trained on unnecessary boards. For painting of sidewalls of set and facades it is possible to use autoenamels in barrels. They have strong smell, letuch and demand work in respirator.
7. For creation of the beautiful difficult painted surfaces use glaze. For this purpose buy transparent paint – glizal. It can be the same color, as paint on complete kitchen, and maybe strongly to differ. Pay attention to the operation manual of glizala. There it is specified, what is the time at you is for creation of the decorative drawing until transparent paint has dried. The glaze can be done by the impressive roller, dry-brush crumpled by piece of polyethylene. When using glizala, finishing varnish is necessary for coloring of kitchen furniture for fixing of result.
8. Dry facades and sidewalls. Screw handles and loops. Collect furniture.