The leather processing is necessary for giving of additional consumer properties and production to it from it various parts. The procedure of leather processing can be carried out in various ways - on candle, on the rangette and by means of the zhmurka equipment.
It is required to you
- Candle, electric stove, organic glass, leather, tweezers, knife.
Instruction
1. The leather processing on svechketaky easy and original way intends for processing of thick skin. On the prepared cliches from paper, parts are cut out from skin. Then, from face side, by means of knife, superficial cuts become. Usually, such method of processing is used during the work with leaves and flowers. Along everyone streaks, leaf there is in half reverse to reverse, the bend is clamped by means of tweezers, and is processed by the fast movement on candle. When all streaks become opened, it is necessary to start processing of sheet edges.
2. The leather processing on elektroplitedlya such way of processing of thick skin is necessary electric stove with the closed heating device. You should not heat strongly plate because skin quickly burns. All streaks when processing can be opened at the same time. The leaf is cut, cuts are carried out and face side keeps within on plate surface. Skin has to be on electric stove several seconds, it is no more. Then by means of tweezers the leaf turns over on other party and is removed.
3. The leather processing in the zhmurka equipment When processing is in such a way used soft skin which easily gives in to drapery. Such equipment as "zhmurka" will help to decorate any product. Folds can be put in various figures and patterns. At first at piece of skin edges blink, are turned in and glued to reverse. After that hands the piece develops in folds and takes the necessary form. Further, the piece is developed, coated from reverse with glue and again gathers on the planned drawing. It is better to carry out such way of leather processing on ceramic plate or organic glass.