Finishing work – rather labor-intensive process demanding financial and physical expenses, enough time and patience. It is not obligatory to have extensive experience in paint work or to be specialist finisher independently to recolour walls. Availability of necessary resources and goal will help to achieve achievement of objective.
It is required to you
- - paint;
- - teplon;
- - putty;
- - brush;
- - roller;
- - emery cloth;
- - drill;
- - Bulgarian.
Instruction
1. Before tinctorial works it is necessary to prepare walls. Smooth out emery cloth old paint, in particular in those places where it peels off. It is better for Nazhdachk to use medium-grained not to leave marks on wall. Also it can be used as nozzle on drill or the Bulgarian. This adaptation will significantly reduce time. Tear off all available door platbands, moldings and plinth. Zashpatlyuyte all roughnesses on some sites of walls. After drying to their zashtukaturta completely of the heatnumber also apply one more thin film of putty. Such procedure will make surface of walls absolutely equal, will improve noise isolation, will exclude the probability of subsidence of old plaster.
2. Having up to the end prepared wall, you pass to priming. It is necessary in order that paint laid down evenly and did not peel off. It is possible to ground normal brush or spray. Key feature of the first method is the quality. The second – speed. Having pro-grounded once, wait for full drying, usually it occurs in one and a half-two hours, and ground the second that this substance has most strongly eaten in wall surface.
3. Further start paint preparation. Properly think and be defined what specifically you awake to use. To paint with normal enamel it will definitely not turn out because it is not intended for such surface. Best of all aqueous emulsion ink, and will be suitable for external works, it is the most resistant. Basis of water emulsion is water, but not various oils, as in other paints. So she gets divorced water too. But you should not add too much that there was no effect, as from lime. Usually aqueous emulsion ink has white color. It is possible to change shade special color. At its addition it is necessary to mix all basis before receiving homogeneous mass.
4. You make painting by means of the roller. It does not reserve fibers on surface. But labor-consuming areas of wall – corners, in feature between floor and ceiling, paint over brush not to soil surface. After drying of the first layer, start painting of the second. To improve effect, it is the best of all to put all subsequent layers with the same solution of paint, as the first. For this purpose it is necessary to get from the very beginning necessary volume and to mix everything at the same time in one capacity.
5. Having finished painting, wait so far all walls will dry. Usually on it leaves about day. After that safely you fix back platbands, moldings and plinth.