How to remake the attic

How to remake the attic

In the house the biggest and a little used room which is used for various needs it is the attic. Everyone has the right to decide how to use it: as storeroom or as additional living space. Alteration of the attic is the shortest way to expansion of the house which is not connected with big expenses.

It is required to you

  • - moisture protective film;
  • - stapler;
  • - heater (polyfoam, mineral wool, polyurethane foam);
  • - hammer, nails or screws;
  • - paroizolyatsionny film (polyethylene film, aluminum foil);
  • - covering (gypsum cardboard, plywood, lining);
  • - decorative coat (plaster, paint, wall-paper);
  • - adhesive tape.

Instruction

1. Considering that the attic is the topmost and the part of the house subjected to all weather patterns, by means of the stapler sheathe walls and ceiling moisture protective film. It is waterproofing which will protect from above the heater laid on it from external moisture.

2. Further carefully warm walls and roof mineral wool which possesses good heat-insulating (protection against cold and heat) and acoustic properties, has the high level of vapor permeability. Fix it by means of nails or screws, without allowing at the same time emergence of emptiness and slots.

3. After you have completely laid thermal insulation and have closed up all gaps, from above lay paroizolyatsionny film with overlap in 10 cm by means of the stapler. Connect edges of vapor barrier adhesive tape. It serves for protection of heater against humid air which comes from the room to light.

4. Warming penthouse floor, between floor beams (boards which have hemmed floor ceiling from below) lay vapor barrier, then - heater, and from above close everything floorboard.

5. Now it is possible to make room covering finishing materials. For walls and ceiling use at will lining, gypsum cardboard, wall panels or plywood. Gypsum cardboard is most practical, it is durable, having high resistance to moistening. It can be pasted over with wall-paper, on previously put putty layer, or to paint with paint (oil or water emulsion). For floor pick up paint or linoleum.

Author: «MirrorInfo» Dream Team


Print