How to sew beautiful curtains most

How to sew beautiful curtains most

Curtains on eyelets are, perhaps, the most suitable option for those who have for the first time decided to sew curtains independently. Such drapery in any interior will look laconically and stylish, and its production will become feasible task for beginners.

It is required to you

  • Fabric, safety pins, sewing machine, pencil, scissors, eyelets

Instruction

1. Measure wall height from floor to eaves. Add to this number 30-40 cm (depending on diameter of eyelets).

2. Determine length of curtain, having increased window width by drapery coefficient. The coefficient 2 will be suitable for this type of curtains. I.e. if window width, for example, of 2 m, is required to you 4 meters of fabric.

3. If the bottom edge of future curtain is not processed, hem it, having twisted 2 times on 1 cm and having stitched on the machine. Also sheathe cloth sides.

4. Measure curtain length in the hemmed state and cut off as much lyuversny tape. It is necessary for strengthening of upper part of curtain on which fixtures will be installed. Width of lyuversny tape has to be more outer diameter of eyelets on 3-4 cm.

5. Put tape on reverse of curtain and align to the top. Turn in fabric together with tape 2 times and pin pins on all length. Press this podgib. Press the iron so much time that fabric with tape have managed to be glued, but glue has not come out. After that stitch top on the machine.

6. Measure 5 cm from the left edge of curtain and at this level give mark in the center of podgib. The center of the first eyelet will be located here. The distance to the following fixture has to make from 15 to 20 cm count it so that on cloth the even number of eyelets has gone in. Distance from the upper edge of rings to curtain top – about 2 cm.

7. Circle internal outlines of ringlets on fabric. Recede from the line of 1 mm and cut openings scissors. It is also possible to use special purpose tool for punching of openings under eyelets.

8. Fix parts of rings in openings by blow before click. If they are latched hardly, it is possible to fix them by the hammer enveloped by fabric – not to damage surface of eyelets.

Author: «MirrorInfo» Dream Team


Print