The interline interval is the wood material made in the form of thin plates. Sometimes there is need of updating of surface which is revetted with interline interval. As common cause of small wavy swellings on surface of interline interval serves the wrong arrangement of sheets.
It is required to you
- - glue;
- - syringe;
- - iron;
- - clamp;
- - knife;
- - polish;
- - brush.
Instruction
1. To exclude emergence of similar defect it is necessary to find and eliminate all swellings in time. Carefully clean the site under interline interval from old glue. Make an incision severe swelling.
2. By means of the syringe enter glue under the formed bubble. From above on interline interval put damp rag.
3. By means of the hot iron press the place of defect. The interline interval will become more elastic. Accurately pound fingers surface and fix by the clamp.
4. Much the damaged places need to be replaced with other interline interval. Prepare small piece of new covering. It has to coincide completely on texture with the repaired surface.
5. On the site with defect cut window. Apply the prepared interline interval to this place. Color and texture of the main background and patch have to coincide completely. Having defined the necessary situation, scalpel or knife cut faithful reproduction of the withdrawn interline interval piece.
6. You keep knife under small inclination that the patch suitable in form has turned out. Do cuts across texture. To avoid splitting of interline interval sometimes cut zigzag.
7. Record adhesive strip. Smooth places of joints brisk paring hammer. Places of transition from the main interline interval have to be imperceptible.
8. Correct the formed mechanical damages (divergence on seam interline interval splitting off at the edges), inserting inserts which have to coincide on texture and color.
9. Start final processing of surface of interline interval. Apply primer and grind it. By means of tampon cover all surface of product with polish.
10. You carry out polishing by the smooth, continuous and sliding movements. All actions on surface have to leave very thin layer of polish.
11. Wait for full drying of the processed product. Brush from horsehair carefully grind interline interval surface.