Modern repair materials allow to simplify as much as possible it and to make very fast. One of the fastest in mounting sexual covering — self-adhesive tile of PVC, and such exact imitations of tree, stone, marble are issued today that even experts distinguish it from the original not at once.
PVC the tile combines all possible merits. It does not avoid damp at all and does not become covered by mold, does not conduct it at temperature variation and humidity, unlike wooden natural covers. The tile of PVC maintains the strongest loadings or can be flexible, depending on class. It is suitable for the Heat-insulated floor system, on condition of heating it is not higher than 28 degrees.
Types of tile of PVC
- Household, to the 32nd class. Such models are suitable for the house or the apartment, they maintain average loads. It is better not to walk on such covering in footwear too often, it can be scratched and lose glossy look.
- Commercial, is marked by 33-42 class. It is option for offices, cafe, restaurants, policlinics and other public places.
- The production tile, is suitable even for the street, garages, parkings. To structure of covering the mineral crumb for the maximum durability is added to abrasion.
Design of tile of PVC
The design of tile can be various, coverings of standard dimensions or difficult mosaic, with normal edges or processed, allowing to make impression of monolithic floor are issued. Especially imitations of tree, stone and also fantasy drawings are popular, and the surface can be glossy, opaque, rough or with stamping.
Laying self-adhesive tile PVC
If the normal tile has to be pasted by means of glue, then the kleyushchy structure is already caused on rear side of self-adhesive tile of PVC. Before works it is necessary to prepare floor surface: to clean from old coverings, to degrease, remove all dust and dirt. Will better drop floor, but if it is required to make repairs quickly, it is possible to manage and so: the vinyl tile perfectly caves in under small corners, and at operation does not creak and does not burst.
When the surface is ready, it is necessary to put tiles to floor and if necessary to cut. It is possible to cut PVC of tile of small section the normal cutting torch or knife, for thick production the electrofret saw or plitkorez is useful.
It is necessary to remove carefully protecting paper cover from reverse side and to put tile to floor, slightly curving that there was no air bubble left. Then carefully to press and roll the roller.