Panels of siding are used by very many owners during finishing of country houses. Often such material fastens on special framework which allows to lay also layer of thermal insulation. But it is necessary to consider that the specific option of heat-insulating works under siding is defined by type of the heater. It is worth getting acquainted with those ways of warming which are the most demanded now.
Warming by polyfoam under siding
All laying of thermal insulation from polyfoam will cost cheaper. It is placed between furring racks, attaching most often by means of glue. Polyfoam – material very easy therefore to paste it is not difficult. But it is important to consider that high-quality warming will be possible to receive enough thick plates of material only when using. Their thickness has to be about 10 cm. That is and for framework under siding it is necessary to take thick bars. And it is additional inconveniences which are better for avoiding.
Thermal insulation penoplex under siding
Work with penoplex in this case looks approximately the same as with polyfoam. It can be fixed not only on glue, but also on dowel. Especially, the layer of penoplex can be much less. Even in case plates only 5 cm thick are used, warming under siding will turn out very qualitative. Penoplex well resists to moisture, does not burn, long serves. Therefore it is not even necessary some to protect it in a special way. After laying of penoplex it is possible to start mounting of front panels at once.
Mineral wool under siding panel
Common fault of polyfoam and penoplex in their low environmental friendliness. Other business – mineral wool is perfect. It is used when want to receive the heat-insulation layer capable it is easy to pass air and not spoiling the general environmental friendliness of facing. But the minvata has also very serious shortcoming. It is that this heater quickly spoils because of contact with moisture. Therefore before installation of panels of siding it is necessary to cover heat-insulation layer also waterproofing.
Each of the described methods has the right to life. But the owner has to choose that which in its case will be the most successful. Only then, having correctly carried out heat-insulating works, he will receive worthy result. The siding will protect walls from damages and to decorate the building, and heat insulator – to prevent heat waste.