The coil Tesla, it the Tesla coil is the unique device not so similar to ordinary transformers which operating condition is the self-induction. For the Tesla coil absolutely on the contrary: the less self-induction, the better. Very interesting and inexplicable effects are shown during its work. But despite all mysteriousness, it is simple to bring together him most in house conditions.
It is required to you
- Copper wires, plastic pipe, source of high voltage, condenser.
Instruction
1. Take a copper wire about 10 millimeters thick.
2. Wind from it the coil consisting of six rounds and with a diameter of 10 centimeters. It will be primary winding of the transformer.
3. Further take a piece of a plastic pipe about 50 millimeters in the diameter and reel up on it the coil, a round to a round, a wire in 0.01 millimeter. The quantity of rounds can be from 700 to 1000. It will be a secondary winding of the transformer, it is located in primary. For start of the device it is necessary to give on primary winding of the transformer high-voltage tension in the form of impulses.
4. Connect a high-voltage source of constant tension to primary winding of the transformer through the rated sportsman (the air interval between which contacts occurs el. breakdown). Before the rated sportsman in parallel include the capacity (condenser) in a chain.
5. When giving tension the condenser will begin to be charged, in process of accumulation of a charge tension on its facings increases until in the rated sportsman there is no breakdown, then tension on the condenser will sharply fall, and it will start over again being loaded. It is a cycle of formation of an impulse of the transformer given on primary winding.