In the menu of setup of network devices of D-Link the user can change different data. The input is carried out by means of a certain sequence of actions about which beginning users can not know.
What requires the menu of D-Link?
The menu of network devices of D-Link allows the user to change a huge number of the different information anyway connected with the used router or the modem. In the majority for effective operation of the network device only one principle of setup is used. At will the user can change standard values. For example, it is possible to change a way of protection, to change the password for an entrance to network, a user name, the name of network, etc. It should be noted that it is the best of all not to come into settings of the network device and there to change nothing if you are not sure that you will make everything correctly. Even if any mistake was made, the user can reset all settings to factory (by means of the Reset button) and already then, to make everything properly.
How to come into the menu of D-Link?
To come into the menu (web interface) of D-Link, it is required to open any convenient browser (it is desirable to use Internet Explorer at change of standard settings). In an address bar it is necessary to enter the address of the main gateway of network (IP address) 192.168.0.1 or 192.168.1.1. It is necessary to tell that this address can have also other appearance. It directly depends on the vendor of the network device and its model. After the small window appears, the user will need to enter the login and the password. Sometimes vendors of similar devices write the factory login and the password necessary for a login to the web interface on the box. If it is not there, it is possible to try to write standard values: the login - admin, the password - admin (or to leave the field empty). According to the standard these values are suitable for the majority of devices such.
If the entered values of the login and the password were right, then the user will automatically get access to settings (web interface) of the network device. Otherwise (if the input was not successful), it can mean only one - the master who connected the Internet changed the login and the password for a login to the menu of D-Link. Usually in such cases it had to leave a leaf with the changed data, but sometimes they do not do it, for the purpose of safety (that the user did not come into the web interface and, for example, did not damage the equipment). If there is no similar information, then it is possible or to call this master (if he left the contact phone number) or to reset defined settings to factory by means of the Reset button (usually is located behind the router or the modem) and again to try to carry out a login to the menu of D-Link.