Advantages of a wireless network are indisputable. You have no binding to some specific workplace, and you can connect to the web of any point of your apartment, office, shopping center, etc. where there is a cover zone of network. It is convenient, and can simplify work of any organization considerably. Our instruction will help you to configure a wireless network independently.
Instruction
1. Find on the desktop an icon "Network environment. If this icon is not on a desktop, come into the menu "Start-up//"Settings//"Network connections. Then right-click on an icon "Network environment. Appear the dropdown menu in which you need to select item "Properties.
2. In the opened window "Network connections click with the right mouse button an icon "Wireless network connection. There will be a dropdown menu, select in it "Include.
3. Further in a window "Network connections click with the right mouse button an icon again "Wireless network connection, in the menu click "Properties.
4. Check parameters of settings on a tab "the General. Ticks should stand on buttons "At connection to display an icon in notification area and "Notify at the limited or absent connection.
5. Find and select a tab "Wireless networks in a window "Wireless network connection - "Properties
If you did not find such tab there, then in a window "Wireless network connection - "Properties you need to click "Ok. In the menu "Start-up click "Setup, then the button "The control panel.
In the opened window "The control panel two times click on an icon "Administration, twice on an icon "Services. Make sure that the service "Wireless Zero Configuration (or "Wireless setup) is in a status "Works. If is not present, then click two times on "Wireless Zero Configuration, in the appeared properties window of service click the button "Start-up and "with Ok. In a window "Network connections right-click an icon "Wireless network connection, select "Properties. Find a tab "Wireless networks and make sure that on the button "It is worth using Windows for setup of network a tick.
6. In the field of "The preferred networks click "Add. On a tab "Communication in the field "A network name (SSID) needs to print MIAN (Attention! all letters should be capital letters). Note point "Be connected even if the network does not conduct broadcasting. In section "Authentication in the menu it is necessary to select WPA. On a tab "Data encryption in the appearing menu select TKIP. Make sure that the tick is installed on the button "This direct connection the computer computer, and on "Access points the tick is not used is not necessary.
7. In a window "Properties of a wireless network select a tab "Authentication. In section "The EAP type in the appearing menu it is necessary to select "Protected EAP (PEAP). Remove a tick from the button "Verify authenticity as at the computer at availability of data on the computer. Make sure that a tick you should not "Verify on the button authenticity as at the guest in the absence of data on the computer or the user. Click "Properties.
8. "The protected EAP properties remove a tick from the button a window "Check the certificate of the server. Make sure that "The choice of a method of authentication is in section "Secured password (EAPMSCHAP v2). On the button "Include fast reconnection check.
9. Click "Configure. "EAP MSCHAPv2 properties remove a tick from the button a window "Automatically to use a name of an input and the password Windows. Now click "OK.
10. Click "OK in a window "The protected EAP properties. In a dialog box "Properties of a wireless network select a tab "Connection. Make sure that a tick it is worth "Being connected on the button if the network is in range. After that click "OK.
11. Press the OK button in a window "Wireless network connection – properties, setup of connection is finished.