Some modern providers carry out connection of clients to the general local area network. It allows to create internal resources and to communicate with high speed. It is possible to get access to such local area networks even online. For this purpose it is necessary to perform right tuning of parameters of network connections.
It is required to you
- - CCProxy;
- - Permeo Security Driver.
Instruction
1. For a start create own proxy-server. It will allow other users to be connected to your computer. Install the CCproxy program. Start it and select the HTTP and Socks points. The first parameter is not required, but it will allow to be connected from the outside to the different websites which are in a local zone.
2. Open the Network tab. Install a tick near the Socks Support point and disable the Prohibit External Users parameter. Surely check whether the last function is turned off. Click "In addition". Find the Local IP Address field and enter into it value of your external IP address.
3. If you specify value of the internal IP address, then only local users will be able to be connected to you. Usually it becomes for connection with the Internet via the internal proxy-server. You need to gain converse effect. Remember that the external IP address can periodically change. Check its value after each reset of the computer.
4. Install the Permeo Security Driver program on the client's computer. It will be required for redirection of data through the Socks-protocol of the proxy-server. Start this utility. Specify that IP address which you entered in the Local IP Address field of the CCproxy program as the key address of connection. Surely make sure that in both programs port numbers match.
5. On the networked PC open the list of active connections. Click with the right mouse button an icon of a local area network and select the Access tab. Allow access to this network for all users who are connected from the outside. Specify the used connection with the Internet in the Local area network field.