How to configure the satellite antenna

More and more people give preference to satellite television recently. This type of television succeeded cable broadcasting which branch is in each apartment. Several years ago "plate" was luxury goods, today is a peculiar need. If you bought "plate" not in the agency, and in shop of the equipment, then on your shoulders the installation of this device lays down.

It is required to you

  • Set of satellite television, F-connectors.

Instruction

1. The satellite antenna means installation in such place that on its path there were no noises: trees, houses and other barriers can deprive completely of you the joy of viewing new TV channels. To make connection of the antenna with the device connected to the TV it is necessary to prepare a cable. For this purpose execute its cleaning to a wire core – a thick core. It needs to be smoothed out a knife, to remove enamel. Connect the bared cable to the F-connector. Disek is also a part of a chain of connection – he is the adapter between a cable and a receiver. It is better not to use any insulating tape. Use thermoshrinkage.

2. The majority of often bought satellite antennas, sell copies with three "heads". Essence of setup of these heads following. For each head values are set, after that direct them in different directions to catch the best signal. Values for antenna "heads" following:

- the central head – Sirius, frequency – 11766, speed – 27500, polarization of "N";

- the side head – Amos, frequency - 10722, speed - 27500, polarization of "H";

- the side head – Hotbird, frequency - 11034, speed - 27500, polarization of "V".

3. The principle of work is simple. You need to configure the central head, to find its correct situation. Make the same that was done earlier, in Soviet period and with the Soviet antennas. At first it is necessary to scroll the head clockwise, then against hour. After that use movements by the head here and there. And so set the direction to the central head until there is a small signal. Stop on the place of signal output. Continue movements, but only in this area where it was succeeded to catch a signal. As a result will serve 60-70% of an input signal.

4. After such setup any channel will perfectly show, but 2 side heads thought up not just like that. They are created for improvement of a signal at rains and thunderstorms. Their setup is made by the same principle. After the end of aiming of all heads of the satellite antenna, the general setting will come to an end.

Author: «MirrorInfo» Dream Team


Print