In insufferably hot summer day so there is a wish to have the device which will create comfortable conditions for work and rest. However to buy the conditioner – business simple. It is far more difficult to install it.
Instruction
1. First of all, carry out separate wiring to the conditioner and put the separate automatic machine in an electric board, whatever power there was a device. Old wiring can not sustain strong tension and light up. If your house is built before 1990, then wiring will definitely not cope with loading.
2. Now it is necessary to install the external block of the conditioner. For this purpose drill special openings for brackets which will hold the block. If you install the conditioner on the open balcony, with it there will be no problems – just attach the bracket bolts.
3. If the balcony glazed, then to your conditioner does not gasp for work, it will too quickly break.
4. If you want to hang up the block on a wall, especially on the top floors, then invite for this work of specialists – such brackets should be very strong, and only specially trained people can work at big height.
5. If you live on the first floor, then have the external block at the height not less than two meters above the ground and hide it in a special cage, otherwise there is a danger that the block will be stolen.
6. Further you need to install the internal block. At first on a wall or on a ceiling (depending on a block type) attach special brackets by means of screws. Carefully check, the design how strongly keeps.
7. Do not install a Split system over heat sources at all, indoors, where there are devices radiating high-frequency electromagnetic oscillations over a bed, a sofa or a workplace (it is fraught with cold) where there are some obstacles for free passing of air.
8. Wires and freon tubes between blocks need to be connected. For this purpose punch trenches in walls and on a ceiling. Such process is called a strobleniye. Instead it is possible to hide all wires and tubes under plastic a box or plinths, but it should be surely made by means of a connecting fitting.
9. Check how yours works a Split system by means of the special test program. If the system works normally and does not vibrate, so everything is made correctly.
10. As installation of the conditioner is connected with cultivation of awful dirt, the following item bring order after it. Assemblers should have for cleaning special purpose tools and if they refuse to scavenge, remind them that it is included in the installation price.