The glued bar is the natural material meeting all environmental requirements. To build of it the house heavy machinery is not required - process of assembly takes place quickly, and exterior of the building is very attractive. Therefore the glued bar is more often used at construction of comfortable country houses and country buildings. To receive the strong and qualitative dwelling, it is necessary to observe technology and stages of construction.
Instruction
1. Choose the project the domastroitelstvo of the house is preceded by creation of the project. It can be standard option or the individual development considering your wishes. Depending on the nature of accommodation (year-round or seasonal) pick up thickness of glued bar. In the project all architectural features of the building, base type, type of roof, materials of warming, waterproofing, etc. have to be stipulated. If you intend to use standard development, after paperwork order necessary amount of material. Each part will be made precisely by the known sizes, processed by special structure and numbered.
2. Choose type fundamentay the design depends on conditions of the area, level of soil waters and like soil. Not buried continuous, column or pile footing will be suitable for wooden house. Select basis of design according to survey results. For example, at high level of underground water the pile base is irreplaceable, at dense soil – column.
3. Build to fundamentudalita on the site garbage and plant layer and carry out marking of borders of future building. If for the house the column base is chosen, use ready concrete poles, having placed them in places of the main loadings. Brick support require reinforcing – it will give to laying big durability. Connect upper parts of design beams – they will become the basis for walls. Provide protection of the house from bar from soil moisture. Make base waterproofing – it will protect the lower wreaths from rotting and will improve tightness of the house.
4. Collect stenyn layer of waterproofing lay the first wreath and floor beams of floor. Attentively you look at marking of construction bar - its numbering goes according to the project. For example, 2-3-3 means that the part belongs to wall No. 2, wreath No. 3 from below, part No. 3. Having lifted walls up to the necessary height, close collected box ceiling beams.
5. Make krovlyusnachal collect roof framework – rafter system. Carry out marking and establish parts into place, having strongly fixed them on ridge board and walls. Warm garret space, having laid layers of mineral wool on overlapping and rafters. Close framework roof.
6. Mount to kommunikatsiiustanovita services of heating, water supply and sewerage. For this purpose use polyvinyl chloride or plastic pipes. Make the buried wiring of electricity in the special openings which are in bar.
7. Carry out internal to rabotyobsheyta ceiling, floor, establish doors and windows. The interior finish can be carried out by any materials, but beauty of glued bar should be emphasized only with varnish.