Now closers of doors enjoy wide popularity. At them there are a lot of various characteristics and design features. Irrespective of product type, it needs to be adjusted correctly.
Instruction
1. The correct adjustment of door cylinder allows to configure the following settings: effort to closing or opening, motion speed and possibility of fixing of door in certain situation. Each indicator is influenced first of all by the size and weight of door.
2. Quite often people use floor devices. The fact is that quite just to adjust such closer. There is no box and loading goes only on axis. All this allows to make precisely parameter setting of force and also motion speed of doors.
3. To adjust effort which develop spring devices it is necessary to use special screws. Also it is possible to adjust when moving the body. Practically always adjustment of the door closer directly depends on the correct control of level of compression. At control special attention should be paid to characteristics of doors.
4. It is necessary to make control of opening and closing of bypass valves of oil for regulation of traverse speed of cloth. Installation of thermal valves which change situation, depending on ambient air temperature is provided in some models. The correct setup of the sensor of doors allows to receive as a result smooth opening and closing of doors.
5. To adjust the provision of doors, it is possible to establish fixers. Quite often people get models in which have special locking levers. In other designs there is function of the choice of range of provisions of cloth at which there is operation of the mechanism of fixing.
6. If you have decided to buy the floor device, then surely specify how it is correct to adjust it. Consultants of shop have to give necessary information to you. Otherwise it will be impossible to establish fixers or to perform tuning.