Xenon lamps lamp consume the power of 35 W and at the same time will transform only 7 percent of energy to heat. The 55 W halogen lamps give six times more heat. Therefore automobile headlights which are equipped with xenon lamps do not overheat.
It is required to you
- - xenon lamps complete with socle
- - self-tapping screws
- - mounting set
- - drill
Instruction
1. Before establishing xenon, disconnect the + terminal from the car accumulator. Attentively study the scheme of connection of xenon lamps which each producer attaches to set of the equipment.
2. Choose such place for installation of ballast (control unit of system) that supply leads did not stretch. These places also have to be protected from external pollution and heat impacts.
3. On flat surface fix ballast by means of mounting set, previously having drilled openings which diameter is 3 mm, having recorded bracket self-tapping screws. It is possible to fix ballast on bolts, but at any of options the fixing has to be rigid. Fix by couplers which are delivered in mounting kit the laid wire bundles.
4. Remove protective cover from headlight, disconnect wires which feed the lamp which is subject to replacement and remove it. In protective cover prepare opening with a diameter of 23 mm, using for this purpose construction drill. Then stretch in it wires from the control unit. In opening of cover establish elastic band for protection against moisture.
5. Before replacement of the xenon lamp degrease flask alcohol, then establish xenon on the regular place and record.
6. Put protective cover of headlight into place. Adjust xenon headlights.