Electric stoves of Bosch are worthy rivals of gas-fires. Demand for them is incredibly high. You bet! There is a lot of advantages at electric stoves: their use is safer (it is not necessary to deal with naked flame), is not burned oxygen and temperature of heating of electric stove it is easy to control. But there is one important condition – the electric stove needs to be connected correctly.
It is required to you
- - wires;
- - electric stove with the instruction;
- - screw-driver with the indicator;
- - socket;
- - fork.
Instruction
1. Unpack the acquired electric stove. Attentively study the instruction attached to the unit: in it requirements to safe connection of electric stove are stated. Attentively examine plate for the purpose of identification of visible damages and defects.
2. Check guard. To connect electric stove, the introduction cable going to the apartment has to be copper with the minimum area of cut of 6 mm2. Besides there has to be introduction automatic machine (40-50 Amperes). At the same time, the emergency shutdown by means of OUZO has to be surely provided.
3. Pay attention that electric stoves are on sale as with the cable intended for connection of the unit in the power socket and without it. So, distinguish two ways of connection of electric stoves: connection directly, that is, without power socket, and use of the power socket.
4. If connection of electric stove is made directly, then for a start find on the back panel of the body of the device of wiring (them there can be from three to five). For example, have found three phase wires there. Connect phase wire from guard to these wires: connect black phase wire of guard to contact of L, blue – to contact of N, and flavovirent let on weight.
5. If connection of electric stove is carried out with use of the power socket, then there can be two options of connection of the unit. The first: establish on the cable going from electric stove, fork which would correspond the socket which is already available in kitchen. But there is one nuance: the fact is that power sockets still Soviet period insufficiently reliable therefore the risk is high that power supply will be unstable (the reasons different: the old socket is loosened, bad contacts and another) that will lead to premature failure of electric stove. The second: replace the old power socket with new euro the standard, and on cable establish fork under this socket.