If you the gourmet also like to eat well, the oven is simply necessary for you. In it it is possible to bake potato, meat, fish and, of course, duck in apples. The oven at skillful use can turn the simplest products into delicacy. But what to do if you are only able to prepare, but not to establish oven?
Instruction
1. You can build in oven kitchen wall in which there is under its mounting special curbstone. You can make such curbstone under cabinet. At first design it. Learn previously the sizes of oven which you will establish.
2. Measure dimensions of the built-in equipment or read the instruction to it. All parameters of goods are usually shown in such guides. The oven has to enter curbstone freely. Proceeding from it, also project it.
3. Usually height of ovens fluctuates from 55 to 60 centimeters, but it is possible to meet also more compact models – their height of 40-45 cm. Double ovens have height about 90 cm. They are not complemented with cooking surface. The built-in ovens release for two types of kitchen curbstones 60 cm wide and 90 cm. Depth at the majority of models is 50-55 cm.
4. Establish oven so that behind it there was clean wall. There should not be sockets and pipes. They can prevent the equipment to get up on depth.
5. If you make curbstone under oven, table-top fix on box with an overlap - in front on 40 mm, and behind – 100 mm. Apply these parameters provided that it standard, 600 mm wide.
6. Do overall width of box of 600 mm in size. Do box height under oven by the same size, and depth has to be 460 mm.
7. If in the project there is case level, fix it in the middle of tanks. Lower it down, rather top edge of the side panel, by one centimeter. Only after that you will be able to build in cooking surface in table-top.
8. If you use table-top 28 mm thick, the majority of cooking surfaces will not fit into these dimensions. Lower case level, and the plate normally will rise on the place.
9. At installation provide protection against touch to oven parts which are energized.
10. If the oven is not connected to the power supply network by means of fork, install the disconnecting device at which all poles are disconnected from power supply.