Modern irons need cleaning much less often than the predecessors. If it was necessary to clean the iron nearly weekly twenty years ago, then now it is very rare operation. Therefore special cleanser for cleaning of sole of the iron of pollution it can not appear near at hand. However, the good old "house means" checked decades work at all not worse than patent means. So, how to clean the iron?
Instruction
1. One of the most popular means is salt. It is possible to wipe iron sole with the damp rag strewed with small salt. Small pollution will easily depart. If the iron needs serious cleaning – fill couple of spoons of salt on the sheet of paper, warm the iron to maximum temperature and several times "iron" salt. After this simple operation the sole of the iron will become clean and brilliant.
2. It is possible to clean the iron by means of hydroperit tablet, having carried out on it several times by the hot iron – and then washout the flaking dirt water. Pay attention that cleaning of the iron is in such a way made only in well aired room and at open windows - at reaction of the hydroperit with deposit a lot of gas is emitted.
3. If on the surface of the iron the deltovaty raid (usually it happens because of hard water or use of starch) was formed – it can be removed the cotton wool or rag, the wetted in vinegar. It is possible to add to vinegar several drops of sal ammoniac also.
4. If you have accidentally put the hot iron on plastic bag, and it "припекся" to sole - let's the iron cool down then clean surface acetone or liquid for varnish removal.
5. You should not delete pollution from the surface of the iron by means of knife, abrasive paper or abrasive means: the sole from it will become shershavy, and dirt will stick to it in increasing frequency.