Over time in the remote controller dust, microparticles of fat and sweat from fingers collect. As a result some buttons at first are badly pressed, and later stop working at all. To return to the remote controller original form and to restore functions, it needs to be cleaned.
It is required to you
- - wet towel wipes;
- - rag from microfiber;
- - vodka, solution of alcohol or liquid for washing of glasses;
- - soft toothbrush;
- - soap;
- - laundry detergent.
Instruction
1. Before cleaning of the remote controller pull out from it batteries or accumulators accidentally not to include it.
2. If your remote controller is polluted only outside, then use normal wet towel wipes or damp rag from microfiber.
3. If it has appeared insufficiently because dirt has accumulated around buttons and it cannot be removed with normal napkin, use Q-tips. Moisten them with vodka, alcohol or liquid for washing of glasses. Well wring out stick and wipe the remote controller body between buttons.
4. Strongly polluted remote controller can be cleaned, having only disassembled it. Examine the remote controller from all directions, unscrew all small screws. Take flat blade screwdriver and insert it into furrow between the top and lower parts of the body of the remote controller. Accurately press the screw-driver and uncouple the latch connecting half of the body. Examine latch to understand in what direction you should press the screw-driver to uncouple other fastenings.
5. After analysis of the remote controller before you 4 objects have to lie: 2 half of the body, rubber buttons and payment. Wash the body in warm soap solution by means of soft toothbrush. To clean off rubber buttons, mix any laundry detergent with small amount of water before receiving gruel. Apply this gruel by means of toothbrush on rubber and leave for one or two hours. Liquid detergents are not suitable for this purpose since they wash away only surface layer of fat, and laundry detergent "extends" all fat from rubber. Carefully wash out buttons from residues of powder and dry up towel or the hair dryer.
6. Clean payment with the microfiber moistened with vodka or alcohol. Do not make efforts at payment ottiraniye, you can damage graphite sputtering.
7. Make sure that all parts of the remote controller have dried. Put before yourself the lower part of the body, on it payment, then buttons. Take upper part of the body, press it to lower and latch fastenings of the remote controller.