How to connect hoses to the washing machine

How to connect hoses to the washing machine

Mounting of the washing machine consists in connection of electricity, the sewerage and water supply system. If you can independently make insert in water pipes and sewer drainage system, conduct all installation independently, but do not forget that the wrong mounting can lead to leakages therefore you carry out it according to the scheme attached to the washing machine.

It is required to you

  • - adjustable double on water supply system;
  • - adjustable double on the sewerage;
  • - film FUM;
  • - adjustable siphon;
  • - hoses (if standard length in 1.5 meters is not enough).

Instruction

1. If you live in new building, you do not have need to care for insert. All modern new buildings are equipped the adjustable systems of water and sewage pipes for connection not only washing, but also dish washer and also shower cabins.

2. If you have no insert, close water supply to the apartment, cut pipe of cold water supply, twist the adjustable double or the T-coupler, also you can establish bigger quantity of adjustable openings, it depends on the number of at the same time connected equipment.

3. Fasten filling hose to the body of the washing machine in the intended thread. Depending on machine model the thread can be located on the right or at the left on back wall of the body. Then fasten hose to adjustable opening. All adjustable T-couplers have the control crane for switching off of water supply after use therefore to establish additional there is no need.

4. If you want to install the complementary filter, for example, magnetic or rough cleaning, in this case fasten it to adjustable opening of the T-coupler, and on it install the additional control crane. Condense all connections by means of the film FUM or linen thread.

5. The draining hose can also be connected to the distributing made on sewage pipe of water drainage or to establish adjustable siphon. Level of draining hose has to be above draining therefore record it on the body of the washing machine by means of special clips or attach clips on wall in the bathroom or kitchen, it depends on where you install the machine.

6. If you lack the standard length of draining and filling hose, buy hoses of the necessary length. Increasing hoses, you risk to flood own apartment and the apartment of neighbors from below.

7. If mounting and installation of the washing machine seem to you rather difficult action, invite the expert from service. To you will carry out all mounting to short terms, it is qualitative, reliable also for very reasonable price.

Author: «MirrorInfo» Dream Team


Print